Fall Protection

One system.
Any project.
Zero disconnection.

The problem

Falls happen at the moment of transfer.

Conventional fall arrest systems protect workers while they are stationary. The moment they need to move,change direction or transition between sections, they disconnect. That is when falls happen.

Workers know this. So they move without reconnecting. Not because they are careless, but because conventional systems make full-time connection impractical on a working site.

Common failures

Too complex to install

Too many parts, time-consuming setup, requires specialist tools.

Forces disconnection

Workers disconnect to pass others or change direction — removing all protection at the highest-risk moment.

Permanent only

Most systems cannot be deployed temporarily, leaving short-term projects without a practical solution.

Hookt lifeline

Simpler. Safer. Smarter.

900+ projects across 47 countries. One system, proven on every surface type.

Hookt bifurcation cross — enables 360 degree movement without disconnection

360° movement. No disconnection.

The only system that works in tension and in suspension. Change direction, transition between sections, without ever unhooking.

Slopes up to 40°

Certified for slopes up to 40°, where conventional systems stop at 15°. Adapts to all projects and structures.

Hookt simple anchor system — 3x faster to install

3× faster to install

No tensioner. Energy absorber inside each anchor point. Fewer parts means faster setup, simpler design, and less complexity.

Distributed energy absorption across anchor points

1 line = no length limit

Renewable spans with no redesign required. Scales to any project size.

Applications

Wherever people work at height.

Building

Industry

Civil engineering

Natural environment

How Hookt compares

Hookt vs conventional systems

Feature	Hookt	Conventional
Anchor type	1 universal anchor	Multiple anchor types
Movement	360° — no disconnection	Linear, limited
Max slope	Certified up to 40°	Usually up to 15°
Span length	Unlimited	Limited
Installation	Temporary or permanent	Permanent only
Installation speed	3× faster	Complex, many parts
Users	Up to 5 per span	Usually 2–3 per line

FAQ

Common questions about Fall Protection.

Why is continuous fall protection better than conventional systems? ▼

Conventional systems require workers to disconnect when moving or changing direction—the highest-risk moment for falls. Hookt eliminates disconnection points entirely, keeping workers continuously connected while moving across any surface or changing direction.

Can Hookt be used on sloped roofs? ▼

Yes. Hookt is certified for slopes up to 40°—significantly higher than conventional guardrails or systems designed for flat roofs only.

Does Hookt meet international fall protection standards? ▼

Yes. Hookt is certified to EN 17109, EN 795C and EN 958 and can be installed as a compliant personal fall protection and fall arrest system.

What training is required before using Hookt? ▼

No particular training is required for Hookt. For work-at-height, workers must receive training on: system setup and use, equipment inspection and compatibility, recognizing fall hazards, and rescue and emergency response procedures.

Can Hookt be installed temporarily or permanently? ▼

Both. Hookt can be configured for short-term projects or permanent safety. No change to the system itself, just installation design.

How many workers can use Hookt at the same time? ▼

Up to 5 workers per span, depending on configuration and design parameters. Consult with Aquaguard for your specific load requirements.

Is Hookt suitable for construction, maintenance, or both? ▼

Both. Industries using continuous lifeline systems: Construction | Industrial maintenance | Infrastructure and civil engineering | Rooftop inspections and repairs.

No disconnection. No fall.

Tell us your project requirements and we will recommend the right configuration.

Get in touch

One system.Any project.Zero disconnection.